All industries
Cleanroom pressure cascade — without sensor drift, without false alarms
01Fig. · Cleanroom MonitoringRixen Industrie-Lösung

Industry / Cleanroom Monitoring

Cleanroom pressure cascade — without sensor drift, without false alarms

ISO 14644 mandates continuous monitoring of pressure differential between cleanroom zones — typically 5 to 20 Pa. With a ring balance, you measure these differentials purely mechanically, consistently accurate. The restoring force is based on weight and geometry — no ageing components, no drift. This supports a risk-based extension of calibration intervals once the calibration history demonstrates stability.

A

Regulatory requirements

DIN EN ISO 14644-4 requires continuous differential pressure monitoring between cleanroom classes and against the corridor. The EU GMP guidelines (Annex 1, 2022) go further: aseptic production areas must demonstrate a documentable pressure cascade, typically from the highest class (A/B) to lower classes (C/D) with at least 10–15 Pa difference.

  • Permanent display visible in the corridor or at the airlock
  • Alarm contact triggered when the minimum differential is undercut
  • Loggable signal (4–20 mA or 0–10 V) for GMP audits and validation
  • Scale must be readable from at least two metres away

B

Why a ring balance fits here

The typical weakness of electronic differential pressure sensors is drift. Diaphragm, piezo, and capacitive sensors age: calibration walks off over months, leading in GMP environments to false alarms, unplanned re-calibrations, and validation overhead. The pressure-measuring part of the ring balance contains no diaphragm, no spring, and no components that age, fatigue, or become brittle. Calibration is determined solely by a fixed weight, a lever, and the geometry of the dividing wall — all quantities that do not change.

Drift
physically excluded
Accuracy
±1.5 Pa over the entire lifetime
Maintenance
none
Validation overhead
one factory calibration — ongoing calibration history typically shows no deviations, supporting extended intervals
No false alarms from signal noise
Fast electronic sensors capture every ventilation pulse — what triggers a threshold alarm is often just signal noise. The ring balance mechanically damps these fluctuations and delivers only stable, process-relevant readings.
Readability
150×150 mm analog scale, readable from two metres

C

Technical parameters

Standard
DIN EN ISO 14644-4, EU GMP Annex 1
Typical span
−10…0…+40 Pa, −40…0…+10 Pa, ±50 Pa, −10…0…+60 Pa, 0…50 Pa
Accuracy
±1.5 % FS or ±1.5 Pa
Scale
150 × 150 mm, analog
Signal output
4–20 mA, 0–10 V, switching contacts
Protection
IP65
Cleanroom-ready
Yes, smooth surfaces, no crevices

Trusted by

In pharma and cleanroom environments, Rixen instruments are trusted by: Bayer AG, Novartis AG, Vetter-Pharma, EBEWE Pharma, WEISS-Pharmatechnik, RHÖN Klinikum Bad Neustadt.

Your project

Custom ring balance for your pressure cascade — we calibrate to your span, from ±20 Pa to ±1,800 Pa.